Omicron
Showing all 11 results
-
Secondary Injection Testing
Omicron Arc 256X Arc Flash Initiator
The Omicron ARC 256x minimises potential hazard to personnel and equipment by simulating an arc flash by means of a xenon flash tube, reducing the time of occurrence and disrupting the flow of energy.
-
Circuit Breaker Testing
Omicron CIBANO 500 Circuit Breaker Tester
The Omicron CIBANO 500 carries out important CB tests on all types of CBs, even when a station battery is not available.
-
Secondary Injection Testing
Omicron CMC 356 Universal Relay Test Sets
The Omicron CMC 356 is capable of testing even high-burden electromechanical relays with very high power demands. Six current sources and a great dynamic range.
-
Primary Injection Testing
Omicron CP CR500 Compensating Reactor
The Sonel MMR-620 Micro Ohmmeter enables accurate measurements of both connections resistance (welded, soldered, bolted) and winding resistance of electrical motors and power transformers.
-
Earth Testing
Omicron CP CU1 Coupling Unit for Line and Ground Testing
The Omicron CPC 100 + CP CU1 measures line impedances and k-factors on overhead lines and power cables. Ground impedances can also be determined on large systems with the CP CU1, as well as touch and step voltages.
-
Primary Injection Testing
Omicron CP TD1 Capacitance and Tan Delta Test Unit
The Omicron CP TD1 is a high-precision test system for on-site insulation tests of high-voltage systems, including power and instrument transformers, circuit breakers, capacitors and isolators. It can also be utilised as a high-voltage source for partial discharge measurements.
-
CT Testing
Omicron CPCĀ 100 primary injection test system
Omicron CPCĀ 100 automatically determines all relevant current transformer values and compares the results with the selected standard.
-
CT Testing
Omicron CT Analyser
Omicron CT Analyser automatically determines all relevant current transformer values and compares the results with the selected standard.
-
CT Testing
Omicron CTĀ SB2 Switch Box for CTĀ Analyzer
The Omicron CTĀ SB2 switch box is an accessory for the CTĀ Analyser for automatic testing of multi-ratio current transformers.
-
Earth Testing
Omicron HGT1 Handheld Grounding Tester
The Omicron HGT1 is used to safely and accurately measure step and touch voltages in a substation earthing system
-
Secondary Injection Testing
Omicron SEM 1 Scanning Equipment for Meters
The Omicron SEMĀ 1 contains the OSH 256 passive optical scanning head to detect the status of optical pulse LEDs of electronic energy meters. It is suitable for a wavelength range of 550 nm to 1000 nm.